Tel: +86-13962947398

EP Conveyor Belt

EP Conveyor Belt

FEATURES The carcass consists of Terylene fabric in warp and Polyamide in weft. High tensile strength, good resistance to fatigue, low elongation rate in warp, good through-forming ability in weft, etc.

Detailed description

Providing with customized ep conveyor belt price and quotation consultation, Yutung Industrial Limited is one of the leading ep conveyor belt manufacturers and suppliers in China. Welcome to buy and wholesale quality ep conveyor belt made in China from our factory.

FEATURES

  • The carcass consists of Terylene fabric in warp and Polyamide in weft.

  • High tensile strength, good resistance to fatigue, low elongation rate in warp, good through-forming ability in weft, etc.

  • Suitable for high humity applications and exhibit good water resistance, stable tensile strength with no mildew growth under wet/humid conditions. EP belts also exhibit a high modulus at start up with good dimensional stability and smoother running.

  • EP belts also offer good impact and tear resistant properties owning to the addtion of reinforced ply in its latitude carcass constructions.

  • Manufactured by forming and vulcanizing.

APPLICATIONS

  • Widely used for medium and long distance, heavy loading, high speed, severe corrosion conveying applications.

  • Anti-impact and tear resistant belts are suitable for applications where large materials with relative density up to 2.5g/cm3 to be loaded and with a falling head of more than 1m.

BELT TYPES

Types by Applications: Including general purpose conveyor belts, oil resistant, acid and alkali resistant, cold resistant, anti-static, flame retardant and abrasion resistant belt.

Types by Structure: Aside from the laminated structure, there’s anti-impact and tear resistant belt with reinforced ply weft. 

TECHNICAL DATA

Standard: In accordance to ISO/FDIS 14890:1999

Performance at Overall Thickness

Fabric TypePly Thickness (mm)Nominal Tensile Strength at Overall Thickness (N/mm)Elongation at Break (%)Elongation at Rated Stress
       (%)
Belt Width (mm)Belt Length (M)
2ply3ply4ply5ply6ply
EP800.60160240320400480

≥10 

 

≤4 

 

300~ 1500 

 

≤300 

EP1000.70200300400500600
EP1250.70250375500625750
EP1500.80300450600750900
EP2001.040060080010001200
EP2501.20500750100012501500
EP3001.250900120015001800
EP3501.3000140017502100
EP4001.4000160020002400

Performance of Cover Rubber (for General Applications)

Cover GradeTensile StrengthElongation at Break
       (%) ≥
Abrasion Loss
       (mm³ ) ≤
Change Rate of Tensile
       Strength & Elongation
       after Aging (%)
(MPa) ≥(Kg/c㎡) ≥
Ordinary Applications (L)15.0150.0350200-25 ~ +25
Abrasion Resistant (D)18.0180.0400100-25 ~ +25
Extreme Tear Resistant (H)24.0240.0450120-25 ~ +25
When cover rubber thickness ranging from 0.8~1.60mm, it allows 15% tolerance of tensile strength.
       Aging Test: 70℃×168h.

Note: The cover rubber performance for other belt type like oil resistant, acid and alkali resistant, cold resistant and anti-static belt, please refer to the corresponding belt introduction.

Adhesion Ply to Ply

ItemCanvas Ply to
       Canvas Ply
Cover to Canvas Ply
Cover Thickness 0.8-1.5mmCover Thickness >1.5mm
Average Value of Samples (N/mm) ≥3.02.12.7
Minimum Value of Samples (N/mm) ≥2.71.62.2
The peak value of all samples are less than 20 N/mm.
Related Products
Feedback