Tel: +86-13962947398

Nylon Conveyor Belt

Nylon Conveyor Belt

APPLICATIONS: • Widely used for medium and long distance, heavy-duty transportation of materials. • Suitable for both loose and compacted minerals.

Detailed description

Providing with customized nylon conveyor belt price and quotation consultation, Yutung Industrial Limited is one of the leading nylon conveyor belt manufacturers and suppliers in China. Welcome to buy and wholesale quality nylon conveyor belt made in China from our factory.


• The carcass consists of Nylon fibers both in warp and weft. Manufactured by forming and vulcanizing. 
 • Thin belt body, high abrasion resistance, high tensile strength, anti-impact and good fatigue resistance. Long operational life. 
 • Reinforced latitude carcass leads in better anti-impact and tear resistance. 
 • Good flexibility, trough ability and elasticity leads in better adaptability to the pulley.


• Widely used for medium and long distance, heavy-duty transportation of materials. 
 • Suitable for both loose and compacted minerals. 
 • For anti-impact and tear resistant type belt, they’re suitable for Mining and Coal Applications where load big size materials with relative density up to 2.5g/cm3 and a falling head of 1m.


• Types by Applications: Including general purpose conveyor belts, oil resistant, acid and alkali resistant, cold resistant, anti-static, flame retardant and abrasion resistant belt. 
• Types by Structure: Aside from the laminated structure, there’s anti-impact and tear resistant belt with reinforced ply in weft. 

Standard: In accordance to ISO/FDIS 14890:1999

Performance at Overall Thickness

Fabric TypePly
Nominal Tensile Strength
       at Overall Thickness (N/mm)
Elongation at Break (%)Elongation at Rated Stress (%)Belt Width (mm)Belt Length (M)
NN1000.70200300400500600≥10≤4300 ~ 1500≤300

Performance of Cover Rubber (for General Applications)

Cover GradeTensile StrengthElongation at Break (%) ≥Abrasion Loss (mm³ ) ≤Change Rate of Tensile Strength & Elongation after Aging (%)
(MPa) ≥(Kg/c㎡) ≥
Ordinary Conditions(L)15.0150.0350200-25 ~ +25
Abrasion Resistant(D)18.0180.0400100-25 ~ +25
Cut & Gauge Resistant(H)24.0240.0450120-25 ~ +25
When cover rubber thickness ranging from 0.8~1.60mm, it allows 15% tolerance of tensile strength.
       Aging Test: 70℃×168h.
Note: The cover rubber performance for other belt type like oil resistant, acid and alkali resistant, cold resistant and anti-static belt, please refer to the corresponding belt introduction.

Adhesion Ply to Ply

ItemCanvas Ply to
       Canvas Ply
Cover to Canvas Ply
Cover Thickness 0.8-1.5mmCover Thickness >1.5mm
Average Value of Samples (N/mm) ≥4.503.23.5
Minimum Value of Samples (N/mm) ≥3.902.42.9
The peak value of all samples are less than 20N/mm.
Related Products