Tel: +86-13962947398

Pattern Conveyor Belt

TECHNICAL DATA Standard: In accordance to ISO/FDIS 14890: 1999 Adhesion Strength

Detailed description

Providing with customized pattern conveyor belt price and quotation consultation, Yutung Industrial Limited is one of the leading pattern conveyor belt manufacturers and suppliers in China. Welcome to buy and wholesale quality pattern conveyor belt made in China from our factory.

FEATURES

 • The carcass is made from EP fabric, Nylon fabric, Cotton or Terylene Cotton fabric, etc. The belt is manufactured by forming and vulcanizing. 
 • The patterns available: Chevron / Herringbone / Round Concave. 
 • Generally the conveyed angle could be up to 35 degrees, for bulk material could be up to 28 degrees. 
 • Convex type:raised on top cover, the "open" pattern is suitable for conveying material with box packaging or bags packaging and "close" pattern suitable for bulk materials as well as box packaging or bags packaging.
 Concaved type or Round Concave: dented in the top cover, mostly used for bulk materials. 
 • The depth of pattern less than 10 mm applies to conveyed angle less than 20 degrees. 
 • The depth of pattern more than 10 mm applies to conveyed angle range from 20-40 degrees.

APPLICATIONS

Apply to conveying materials such as powder, granules, knobs as well as packaged materials at angle less than 40 degrees.

BELT  TYPES

The belts include general use, oil resistant, acid-alkali resistant, cold resistant, static conductive, fire retardant, wear resistant and heat resistant types, etc. 

TECHNICAL DATA

Standard: In accordance to ISO/FDIS 14890: 1999

Adhesion Strength

Fabric TypeItem Canvas Ply to
       Canvas Ply
       (N/mm)
Cover to Canvas Ply
Cover Rubber
       Thickness
       ≤1.50mm
Cover Rubber
       Thickness
       >1.50mm
Terylene Cotton-TC70Average Value of Samples in Warp ≥32.102.7
Minimum Value of Sample in Warp2.71.602.2
Polyester-EP
       Nylon-NN
Average Value of Samples in Warp ≥4.503.203.50
Minimum Value of Sample in Warp3.902.402.90
The peak value of all samples are less than 20 N/mm.

Performance of Cover Rubber

Cover GradeTensile StrengthElongation at Break
       (%) ≥
Abrasion Loss
       (mm³ ) ≤
Change Rate of Tensile
       Strength & Elongation
       after Aging (%)
(MPa) ≥(Kg/c㎡) ≥
Ordinary Conditions (L)15.0150.0350200-25 ~ +25
Abrasion Resistant (D)18.0180.0400100-25 ~ +25
Cut & Gauge Resistant (H)24.0240.0450120-25 ~ +25
When cover rubber thickness ranging from 0.8~1.60mm, it allows 15% tolerance of tensile strength.
       Aging Test: 70℃×168h.
Related Products
Feedback