Tel: +86-13962947398

D Type Plastic Bucket

D Type Plastic Bucket

FEATURES Deep bottom bucket for agriculture use. Thicker leading edges for incresed abrasion resistance Reinforced ribs for greater structural integrity Optimum discharge angle Large water level for higher capacity Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc.

Detailed description

Providing with customized D type plastic bucket price and quotation consultation, Yutung Industrial Limited is one of the leading D type plastic bucket manufacturers and suppliers in China. Welcome to buy and wholesale quality D type plastic bucket made in China from our factory.

FEATURES

  • Deep bottom bucket for agriculture use.

  • Thicker leading edges for incresed abrasion resistance

  • Reinforced ribs for greater structural integrity

  • Optimum discharge angle

  • Large water level for higher capacity

  • Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc.



USING RECOMMENDATION

  • Minimum bucket spacing: bucket depth "C" + 10mm

  • For engineering purpose, we recommend using "(Z-Y)+10%" for usable capacity.

  • Mounting holes can be customized on request.

  • Venting holes are available in 5 patterns on request


TECHNICAL SPECIFICATION

ModelBucket Dimension*
       (mm)
Mounting Holes
       (mm)
Capacity(L)Cartion Packaging
Length
       A
Proj.
       B
Depth
       C
Center
to
Center
       E
     
Number
of
 Holes
Hole
Diameter
Distance
Down
D
X-Y(Z-Y)+10%Z-YDimension
L X W X H
 (mm)
Number
per Carton
D4X310781755027220.320.280.25650x430x450320
D5X41331131066027320.850.650.59650x450x500216
D6X41591081039027320.870.720.65650x430x450168
D7X418410810312029321.040.830.75650x430x450104
D6X51681401309029401.481.211.10650x450x500108
D7X519214013012029401.731.321.20650x450x50084
D8X521114013012029401.921.551.41650x440x50084
D8x621116815412029452.832.282.08650x440x50040
D9X52371401308539402.411.931.75650x450x50060
D9X62371681548539453.232.572.34650x430x45048
D10x52661401309039402.62.11.91650x430x45056
D10X62661681549039453.622.842.58650x430x45040
D11X528914013010039452.752.212.01650x430x45042
D11X628716815410039454.013.112.83650x450x50040
D12x53131401308549452.962.322.11650x450x50040
D12X63131681548549454.443.483.16650x450x50035
D22x8582230205100695515.313.3312.12650x450x50010
D13X63381681548549454.743.783.44650x450x35028
D14X63681681549549505.084.153.77650x450x50025
D9X6-1/22301801808539453.672.782.53650x450x50025
D11X6-1/228018018010039454.623.523.20650x450x50025
D10X72691971809039504.834.073.70650x450x50020
D11X728719718010039455.394.353.95650x450x50025
D12X73261971808549455.814.794.35650x430x45020
D13X73431971809049456.525.585.07650x450x35020
D14X73731971809549506.905.745.22650x430x45020
D15X739219718010049507.616.686.07650x430x45016
D16X74271971808559487.946.956.32650x430x45016
D11X82802202166549556.525.404.91650x450x50025
D12X83312222068549557.456.355.77650x430x45014
D12-1/2X83302202168549557.886.555.95650x450x35026
D14X83782222069549558.767.566.87650x430x45014
D14-1/2X83802202167559559.247.696.99650x430x45018
D15X83922222068059559.478.737.94650x430x45014
D16X843422220685595510.388.918.10650x450x50018
D18X847322220695595511.509.989.07650x450x50010
D20X852022521090695513.1111.6610.60650x450x50010
D24X10637290263897116024.921.7819.8650x450x50010
D16X9430260260686116514.5712.1011.00650x450x50010
D110911390836027250.420.300.27650x430x450400
D1411145110966027350.750.710.65650x450x350180
D1311134115946027350.750.560.51650x440x500240
D181418814013012029401.701.491.35650x450x500105
D23142351401308539402.271.601.45650x440x50072
D281428014013910039402.701.871.70650x430x45050
D28162821681549039453.703.012.74650x440x50056

 * Actual dimensions will vary slightly depending on specified raw material. The dimensions shown above are for HDPE buckets. Size A,B and C for Nylon and PU elevator buckets will be about dimensionally 2% larger than HDPE elevator buckets.




Buckets "Nest" together for reduced storage space & freight cost


ELEVATOR BUCKETS

·Over 12 different elevator bucket styles are available for agricultural and industrial applications.
 ·A direct replacement for many other international brands.
 ·Unique elevator bucket design with multiple patents.
 ·Our elevator buckets are well regarded, worldwide for high price/quality ratio.

ELEVATOR BUCKET MATERIAL OPTIONS

MaterialMild SteelStainlessHDPENylon 6Reinforced NylonPU
Cost
Wear Resistance
Impact Resistance
FDA Food Approved
Max Temp℃ Continuous180+250+7010011070
Max Temp℃ Peak2204008012013080

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ .
Nylon:High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products.
Mild Steel: General purpose, long life, well suited to agricultural and industrial products.
Stainless Steel: Food grade, corrosive resistance, suitable for food and high temperature applications.

MEASURE OF ELEVATOR BUCKET

ELEVATOR BUCKET VENTING

A venting bucket can improve the efficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.


VENTING OPTION

Vent Pattern 1


 One row of 6mm or 8mm
 holes in body with same hole
 center and number of holes as
mounting holes in back.





Vent Pattern 2
 One row of 6mm or 8mm holes
 in body on 25mm centers.






Vent Pattern 3

Two rows of 6mm or 8mm holes
 in body on 25mm centers.






Vent Pattern 4
 Two rows of 6mm or 8mm holes
 in body on 25mm centers, three
 holes of 6mm or 8mm on each
 side.




Custom Vent
 Vented as required.





Related Products
Feedback