Tel: +86-13962947398

DH Type Plastic Bucket

DH Type Plastic Bucket

Nylon:High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.

Detailed description

Providing with customized dh type plastic bucket price and quotation consultation, Yutung Industrial Limited is one of the leading dh type plastic bucket manufacturers and suppliers in China. Welcome to buy and wholesale quality dh type plastic bucket made in China from our factory.

FEATURES

 • Well suited to agricultural applications such as drying of rice, seeds and grains as well as any other products that have to be dried/treated for further processing. 
 • Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc.


USING RECOMMENDATIONS

 • Minimum bucket spacing: bucket projection "B" + 25 mm. 
 • For engineering purposes, we recommend using "(Z-Y) + 10%" for usable capacity. 
 • Mounting holes can be customized on request. 
 • Venting holes are available in 5 patterns on request.


TECHNICAL SPECIFICATIONS

ModelBucket Dimension*
       (mm)
Mounting Holes
       (mm)
Capacity(L)Cartion Packaging
Length
       A
Proj.
       B
Depth
       C
Center
to
Center
       E
     
Number
of
Holes
Hole
Diameter
Distance
Down
D
X-Y(Z-Y)+10%Z-YDimension
L X W X H
 (mm)
Number
per Carton
DH110611662626327130.170.110.10650x450x350250
DH140614364717627190.220.180.16650x450x350230
DH1409147948796.527200.420.210.19650x450x350225
DH1808189877910027200.530.370.34650x430x450210
DH1910197100876537170.740.340.31650x430x450200
DH251225512311614129301.401.101.00650x440x50090

ELEVATOR BUCKETS

 ·Over 12 different elevator bucket styles are available for agricultural and industrial applications.
 ·A direct replacement for many other international brands.
 ·Unique elevator bucket design with multiple patents.
 ·Our elevator buckets are well regarded, worldwide for high price/quality ratio.


ELEVATOR BUCKET MATERIAL OPTIONS

MaterialMild SteelStainlessHDPENylon 6Reinforced NylonPU
Cost
Wear Resistance
Impact Resistance
FDA Food Approved
Max Temp℃ Continuous180+250+7010011070
Max Temp℃ Peak2204008012013080

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ .
Nylon:High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products.
Mild Steel: General purpose, long life, well suited to agricultural and industrial products.
Stainless Steel: Food grade, corrosive resistance, suitable for food and high temperature applications.

MEASURE OF ELEVATOR BUCKET

ELEVATOR BUCKET VENTING

A venting bucket can improve the efficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.


VENTING OPTION

Vent Pattern 1


 One row of 6mm or 8mm
 holes in body with same hole
 center and number of holes as
mounting holes in back.





Vent Pattern 2
 One row of 6mm or 8mm holes
 in body on 25mm centers.






Vent Pattern 3

Two rows of 6mm or 8mm holes
 in body on 25mm centers.






Vent Pattern 4
 Two rows of 6mm or 8mm holes
 in body on 25mm centers, three
 holes of 6mm or 8mm on each
 side.




Custom Vent
 Vented as required.






Hot Tags: DH type plastic bucket China, suppliers, manufacturers, factory, wholesale, customized, quality, buy, price, quotation, made in China
Related Products
Feedback