Tel: +86-13962947398

DL Type Plastic Bucket

DL Type Plastic Bucket

Actual dimensions of the buckets will vary slightly depending on specified raw material. The dimensions shown above are for PP buckets. Size A, B and C for Nylon buckets will be about dimensionally 2% larger than PP buckets.

Detailed description

Providing with customized dl type plastic bucket price and quotation consultation, Yutung Industrial Limited is one of the leading dl type plastic bucket manufacturers and suppliers in China. Welcome to buy and wholesale quality dl type plastic bucket made in China from our factory.

FEATURES

 • Specially designed for chain conveyors with horizontal product transmission. 
 • Commonly used where there is a high demand for low damage to products where conventional elevator will not work or where there will be difficulties with loading and discharge of products. 
 • Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc.


USING RECOMMENDATIONS

• Dimension "G" is designed by referring to the conveyor chain pitch in the chain conveyors. 
 • Consult our engineer for the installation of DL buckets as various dimensions and figures are needed to be considered.




TECHNICAL SPECIFICATIONS

ModelBucket Dimension* (mm)Capacity(L)Cartion Packaging
Length
       A
Proj.
       B
Depth
       C
D
EFGDimension
L X W X H
 (mm)
Number
per Carton
DL241224613261/2821221271.20650x430x45060
DL261926019078.5341309190190.52.34650x430x45050
DL311531016078/354149158.752.30650x450x50040
DL321933020078/373173190.53.19650x450x50030
DL3319368198103440400173190.54.00650x450x50020
DL3821384213125480430195203.54.80650x450x50024
DL401340613369/4301101272.00650x450x50040
DL6323651236120762717205228.611.00770x480x45012

* Actual dimensions of the buckets will vary slightly depending on specified raw material. The dimensions shown above are for PP buckets. Size A, B and C for Nylon buckets will be about dimensionally 2% larger than PP buckets.


ELEVATOR BUCKETS

 ·Over 12 different elevator bucket styles are available for agricultural and industrial applications.
 ·A direct replacement for many other international brands.
 ·Unique elevator bucket design with multiple patents.
 ·Our elevator buckets are well regarded, worldwide for high price/quality ratio.


ELEVATOR BUCKET MATERIAL OPTIONS

MaterialMild SteelStainlessHDPENylon 6Reinforced NylonPU
Cost
Wear Resistance
Impact Resistance
FDA Food Approved
Max Temp℃ Continuous180+250+7010011070
Max Temp℃ Peak2204008012013080

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ .
Nylon:High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products.
Mild Steel: General purpose, long life, well suited to agricultural and industrial products.
Stainless Steel: Food grade, corrosive resistance, suitable for food and high temperature applications.


MEASURE OF ELEVATOR BUCKET

ELEVATOR BUCKET VENTING

A venting bucket can improve the efficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.


VENTING OPTION

Vent Pattern 1


 One row of 6mm or 8mm
 holes in body with same hole
 center and number of holes as
mounting holes in back.





Vent Pattern 2
 One row of 6mm or 8mm holes
 in body on 25mm centers.






Vent Pattern 3

Two rows of 6mm or 8mm holes
 in body on 25mm centers.






Vent Pattern 4
 Two rows of 6mm or 8mm holes
 in body on 25mm centers, three
 holes of 6mm or 8mm on each
 side.




Custom Vent
 Vented as required.






Related Products
Feedback