Tel: +86-13962947398

DM Type Plastic Bucket

DM Type Plastic Bucket

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator.

Detailed description

Providing with customized dm type plastic bucket price and quotation consultation, Yutung Industrial Limited is one of the leading dm type plastic bucket manufacturers and suppliers in China. Welcome to buy and wholesale quality dm type plastic bucket made in China from our factory.

FEATURES

• Continuous Discharge elevator bucket for agricultural use. Suitable for low speed discharge elevators with belt speed of 0.5~0.8 mtrs/s. 
• A perfect choice for products that are fragile or easily damaged. The low speed of discharge makes it an ideal bucket for moving products that need to be conveyed with minimal impact.

 

USING RECOMMENDATIONS
 • Minimum bucket spacing: bucket depth "C" +2 mm. 
 • For engineering purposes, we recommend using"L" for usable capacity. 
 • Mounting holes can be customized on request.



TECHNICAL SPECIFICATIONS

ModelBucket Dimension*
       (mm)
Mounting Holes
       (mm)
Capacity
 (L)
Cartion Packaging
Length
       A
Proj.
       B
Depth
       C
Center
to
 Center
       E
     
Number
of
 Holes
Hole
Diameter
Distance
Down
D
FDimension
L X W X H
 (mm)
Number
per Carton
DM10101051101295029481420.70650x450x500108
DM13101381101288027371420.88650x450x50090
DM14131431431729329521861.60650x450x50042
DM171517515617611329521892.40650x430x45026
DM201720717919413929602153.60650x430x45020
DM231323013816212527441752.21650x430x45015
DM291729617319711039602175.26650x430x45024
DM292129421020011339552236.2050x430x45010

*Actual dimensions of the buckets will vary slightly depending on specified raw material. The dimensions shown above are for HDPE buckets. Size A, B and C for Nylon and Urethane buckets will be about dimensionally 2% larger than HDPE buckets.


ELEVATOR BUCKETS

 ·Over 12 different elevator bucket styles are available for agricultural and industrial applications.
 ·A direct replacement for many other international brands.
 ·Unique elevator bucket design with multiple patents.
 ·Our elevator buckets are well regarded, worldwide for high price/quality ratio.


ELEVATOR BUCKET MATERIAL OPTIONS

MaterialMild SteelStainlessHDPENylon 6Reinforced NylonPU
Cost
Wear Resistance
Impact Resistance
FDA Food Approved
Max Temp℃ Continuous180+250+7010011070
Max Temp℃ Peak2204008012013080

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ .
Nylon:High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products.
Mild Steel: General purpose, long life, well suited to agricultural and industrial products.
Stainless Steel: Food grade, corrosive resistance, suitable for food and high temperature applications.

MEASURE OF ELEVATOR BUCKET

ELEVATOR BUCKET VENTING

A venting bucket can improve the efficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.


VENTING OPTION

Vent Pattern 1


 One row of 6mm or 8mm
 holes in body with same hole
 center and number of holes as
mounting holes in back.





Vent Pattern 2
 One row of 6mm or 8mm holes
 in body on 25mm centers.






Vent Pattern 3

Two rows of 6mm or 8mm holes
 in body on 25mm centers.






Vent Pattern 4
 Two rows of 6mm or 8mm holes
 in body on 25mm centers, three
 holes of 6mm or 8mm on each
 side.




Custom Vent
 Vented as required.






Related Products
Feedback