Tel: +86-13962947398

DW Type Plastic Bucket

DW Type Plastic Bucket

FEATURES • Bottomless elevator Buckets for agricultural use. • An assembly of several bottomless elevator buckets and one bucket with bottom is installed at a close spacing on the belt. This will allow materials to be conveyed continuously allowing larger capacity.

Detailed description

Providing with customized dw type plastic bucket price and quotation consultation, Yutung Industrial Limited is one of the leading dw type plastic bucket manufacturers and suppliers in China. Welcome to buy and wholesale quality dw type plastic bucket made in China from our factory.

FEATURES

• Bottomless elevator Buckets for agricultural use. 
• An assembly of several bottomless elevator buckets and one bucket with bottom is installed at a close spacing on the belt. This will allow materials to be conveyed continuously allowing larger capacity. Capacity will increase 1.5~2 times by using bottomless elevator buckets. Bottomless elevator buckets can be used at higher discharge speed. 
• Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc.

 

USING RECOMMENDATION

• Minimum bucket spacing: Buckets spacing in one group= "C" +1mm; Bucket spacing between the groups= Bucket Projection"B" Bucket Depth "C" +25mm. 
• For engineering purposes, we recommend using "L" for usable capacity. 
• Mounting holes can be customized on request

TECHNICAL SPECIFICATIONS

ModelBucket Dimension*
       (mm)
Mounting Holes
       (mm)
Capacity(L)Cartion Packaging
Length
       A
Proj.
       B
Depth
       C
Center
 to
Center
       E
     
Number
of
 Holes
Hole
 Diameter
Distance
 Down
 D
Dimension
L X W X H
  (mm)
Number
per Carton
DW07067262303026.5140.08650x450x3501200
DW110911092506026.5200.21650x430x450600
DW09079078334026.5150.18650x450x500750
DW1109A11092456026.5220.25650x450x500400
DW1310130102457026.5200.36650x430x450432
DW1311130110457026.5180.36650x450x500560
DW1812186125609028.5250.85650x430x450175

* Actual dimensions of the buckets will vary slightly depending on specified raw material. The dimensions shown above are for HDPE buckets. Size A, B and C for Nylon and PU elevator buckets will be about dimensionally 2% larger than HDPE elevator buckets.


ELEVATOR BUCKETS




·Over 12 different elevator bucket styles are available for agricultural and industrial applications.
 ·A direct replacement for many other international brands.
 ·Unique elevator bucket design with multiple patents.
 ·Our elevator buckets are well regarded, worldwide for high price/quality ratio.


ELEVATOR BUCKET MATERIAL OPTIONS

MaterialMild SteelStainlessHDPENylon 6Reinforced NylonPU
Cost
Wear Resistance
Impact Resistance
FDA Food Approved
Max Temp℃ Continuous180+250+7010011070
Max Temp℃ Peak2204008012013080

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ .
Nylon:High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products.
Mild Steel: General purpose, long life, well suited to agricultural and industrial products.
Stainless Steel: Food grade, corrosive resistance, suitable for food and high temperature applications.

MEASURE OF ELEVATOR BUCKET

ELEVATOR BUCKET VENTING

A venting bucket can improve the efficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.


VENTING OPTION

Vent Pattern 1


 One row of 6mm or 8mm
 holes in body with same hole
 center and number of holes as
mounting holes in back.





Vent Pattern 2
 One row of 6mm or 8mm holes
 in body on 25mm centers.






Vent Pattern 3

Two rows of 6mm or 8mm holes
 in body on 25mm centers.






Vent Pattern 4
 Two rows of 6mm or 8mm holes
 in body on 25mm centers, three
 holes of 6mm or 8mm on each
 side.




Custom Vent
 Vented as required.






Hot Tags: dw type plastic bucket, China, suppliers, manufacturers, factory, wholesale, customized, quality, buy, price, quotation, made in China
Related Products
Feedback