Tel: +86-13962947398

S Type Plastic Bucket

S Type Plastic Bucket

ELEVATOR BUCKETSElevator-Buckets.jpg ·Over 12 different elevator bucket styles are available for agricultural and industrial applications. ·A direct replacement for many other international brands. ·Unique elevator bucket design with multiple patents.

Detailed description

Providing with customized S type plastic bucket price and quotation consultation, Yutung Industrial Limited is one of the leading S type plastic bucket manufacturers and suppliers in China. Welcome to buy and wholesale quality S type plastic bucket made in China from our factory.

FEATURES
 • Shallow bottom elevator bucket for agricultural use. 
 • Optimized bucket design: 
 – Thicker leading edges for increased abrasion resistance. 
 – Reinforced ribs for greater structural integrity. 
 – Optimum discharge angle.
 – Large water level for higher capacity. 
 • Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc.


USING RECOMMENDATIONS

 • Minimum bucket spacing: bucket projection "B" or "B"-20 mm. 
 • For engineering purposes, we recommend using " (Z-Y) +5%" for usable capacity.
 • Mounting holes can be customized on request.
 • Venting holes are available in 5 patterns on request


TECHNICAL SPECIFICATION

ModelBucket Dimension*
       (mm)
Mounting Holes
       (mm)
Capacity(L)Cartion Packaging
Length
       A
Proj.
       B
Depth
       C
Center
to
Center
       E
     
Number
of
Holes
Hole
 Diameter
Distance
Down
D
X-Y(Z-Y)+5%Z-YDimension
L X W X H
(mm)
Number
per Carton
S1613165135829029250.960.760.72650x430x450140
S23142351439612029301.681.281.22650x450x500108
S23152351559112029301.781.491.42650x440x50090
S2814285143969039302.081.591.59650x430x45060
S2815285155919039302.201.861.86650x430x45060
S28162901651089039352.652.312.31650x450x35054
S282128521914510039455.033.763.76650450×35050
S32163301651118049353.232.362.36650x450x35048
S412142021914511049457.585.705.70650x440x50040

* Actual dimensions of the buckets will vary slightly depending on specified raw material. The dimensions shown above are for HDPE elevator buckets. Size A, B and C for Nylon and PU buckets will be about dimensionally 2% larger than HDPE elevator buckets.


ELEVATOR BUCKETS

 ·Over 12 different elevator bucket styles are available for agricultural and industrial applications.
 ·A direct replacement for many other international brands.
 ·Unique elevator bucket design with multiple patents.
 ·Our elevator buckets are well regarded, worldwide for high price/quality ratio.


ELEVATOR BUCKET MATERIAL OPTIONS

MaterialMild SteelStainlessHDPENylon 6Reinforced NylonPU
Cost
Wear Resistance
Impact Resistance
FDA Food Approved
Max Temp℃ Continuous180+250+7010011070
Max Temp℃ Peak2204008012013080

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ .
Nylon:High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products.
Mild Steel: General purpose, long life, well suited to agricultural and industrial products.
Stainless Steel: Food grade, corrosive resistance, suitable for food and high temperature applications.

MEASURE OF ELEVATOR BUCKET

ELEVATOR BUCKET VENTING

A venting bucket can improve the efficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.


VENTING OPTION

Vent Pattern 1


 One row of 6mm or 8mm
 holes in body with same hole
 center and number of holes as
mounting holes in back.





Vent Pattern 2
 One row of 6mm or 8mm holes
 in body on 25mm centers.






Vent Pattern 3

Two rows of 6mm or 8mm holes
 in body on 25mm centers.






Vent Pattern 4
 Two rows of 6mm or 8mm holes
 in body on 25mm centers, three
 holes of 6mm or 8mm on each
 side.




Custom Vent
 Vented as required.





Hot Tags: s type plastic bucket, China, suppliers, manufacturers, factory, wholesale, customized, quality, buy, price, quotation, made in China
Related Products
Feedback