Tel: +86-13962947398

SS Type Steel Bucket

SS Type Steel Bucket

Some Models subject to availability. Steel elevator buckets are supplied complete with standard recessed holes. Special drilling is available on request.

Detailed description

Providing with customized SS type steel bucket price and quotation consultation, Yutung Industrial Limited is one of the leading SS type steel bucket manufacturers and suppliers in China. Welcome to buy and wholesale quality SS type steel bucket made in China from our factory.

FEATURES


• Shallow bottom style for higher capacity at closer bucket spacing.

• Monobloc pressed seamless construction. The Smooth inner and outer surface finish assist with a cleaner discharge of products. 
• Well suited to high temperature applications, or where heavy products or sharp products are likely to be elevated .

 

USING RECOMMENDATIONS

• Minimum bucket spacing: bucket projection "B" or "B"-20mm
 • Special thickness is available on request. 
 • Venting holes are available in 5 patterns on request.

 

TECHNICAL SPECIFICATIONS

ModelBucket Dimension*
       (mm)
Mounting Holes
       (mm)
Capacity(L)Weight
 (Kgs)
Number
 per m³
Length
       A
Proj.
       B
Depth
       C
ThicknessCenter
 to
Center
       E
     
Number
 of   Holes
Hole
 Diameter
Distance
Down
D
X-Y(Z-Y)+5%Z-Y
SS100910689601.05029200.290.200.190.1257200
SS1312140115781.57029220.610.430.410.344200
SS1814188140921.510029281.290.950.900.522450
SS2314237142921.512029281.701.331.260.6951680
SS23162381651081.5/2.012029352.251.731.260.83/1.11360
SS2814287142921.59039282.111.641.560.831260
SS28162891651081.5/2.080311382.912.182.080.98/1.31020
SS30183081851162.010039353.662.582.461.56900
SS33163301651082.010039383.302.532.411.551020
SS30213102171402.0100311385.504.204.002.05600
SS33213402141302.0/2.5120311385.514.113.921.85/2.32500
SS37213842141302.589411386.184.394.182.25500
SS45214642141302.589511388.005.874.183.35400
SS46264652601702.5955115010.707.357.005.6350
SS56265652651702.51105115015.0011.0010.507.1300

 

Note: Some Models subject to availability. Steel elevator buckets are supplied complete with standard recessed holes. Special drilling is available on request.

ELEVATOR BUCKETS

 ·Over 12 different elevator bucket styles are available for agricultural and industrial applications.
 ·A direct replacement for many other international brands.
 ·Unique elevator bucket design with multiple patents.
 ·Our elevator buckets are well regarded, worldwide for high price/quality ratio.


ELEVATOR BUCKET MATERIAL OPTIONS

MaterialMild SteelStainlessHDPENylon 6Reinforced NylonPU
Cost
Wear Resistance
Impact Resistance
FDA Food Approved
Max Temp℃ Continuous180+250+7010011070
Max Temp℃ Peak2204008012013080

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ .
Nylon:High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products.
Mild Steel: General purpose, long life, well suited to agricultural and industrial products.
Stainless Steel: Food grade, corrosive resistance, suitable for food and high temperature applications.

MEASURE OF ELEVATOR BUCKET

ELEVATOR BUCKET VENTING

A venting bucket can improve the efficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.


VENTING OPTION

Vent Pattern 1


 One row of 6mm or 8mm
 holes in body with same hole
 center and number of holes as
mounting holes in back.





Vent Pattern 2
 One row of 6mm or 8mm holes
 in body on 25mm centers.






Vent Pattern 3

Two rows of 6mm or 8mm holes
 in body on 25mm centers.






Vent Pattern 4
 Two rows of 6mm or 8mm holes
 in body on 25mm centers, three
 holes of 6mm or 8mm on each
 side.




Custom Vent
Vented as required.






Related Products
Feedback